G-code generator for 3D printers

SuperSlicer takes 3D models (STL, OBJ, AMF) and converts them into G-code instructions for FFF printers or PNG layers for mSLA 3D printers. It's compatible with any modern printer based on the RepRap toolchain which is running a firmware based on Marlin, Prusa, Klipper, etc.

SuperSlicer is based on PrusaSlicer by Prusa Research. PrusaSlicer is based on Slic3r by Alessandro Ranellucci and the RepRap community.

What are SuperSlicer main features? main new features/differences?

* Custom-made generated calibration tests.
* new settings to fine-tune the top surface quality, like 'only one perimeter on top'.
* A 'denser infill' option for supporting the (solid) top layers.
* Better Thin walls (anchored inside the print, no more random bits at the ends, embedded in perimeter loops).
* Options to change holes dimensions and/or geometry, to print them at the right size.
* Better overhangs (add perimeters if needed, slice them in opposite direction each layer).
* Brim rework: many more options (inside, outside only, 'ears', per object)
* Some new seam options, to help hide them.
* Built-in calibration prints
* Built-in object generation script
* Can join perimeters into a big one to avoid travel moves.
* Many other little options and corrections (like the filled concentric pattern).
* It has also all the current slic3rPE/PrusaSlicer features.

Name

superslicer

Repository

HaikuPorts

Repository Source

haikuports_x86_64

Version

2.5.60.0-2

Download Size

65.7 MB

Source available

Yes

Categories

Graphics , Science and Mathematics

Version Views

59